Injection Molding Machine PE Screw and Barrel

<

  • Size: Customize
  • Nitrided Layer Depth: 0.5-0.8mm
  • Trademark: ZHONGYANG
  • Origin: China
  • Material: Nitriding Steel
  • Nitrided Hardness: HRC56-58
  • Specification: ISO 9001: 2008 approved
  • HS Code: 84779000
Injection Molding Machine PE Screw and Barrel

Specification:
Screw Diameter: D20mm-D220mm
Mould clamping force: 250T-3200T
Shot weight: 30G-30000G

Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT

Bimetallic alloy materials:
(1)Fe-based alloy
(2)Ni-based alloy/Deloro alloy
(3)Co-based alloy
(4)NiCo-based alloy
(5)Tungsten carbide/Wolfram carbide

Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting

Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm

Focus on quality and service.
Experienced manufacturer, we will be the best choice.

N/SP MESH

Nylon Spandex Mesh,Metallic Spandex Fabric,Nylon Spandex Mesh Fabric,Nylon Metallic Spandex Mesh

SHAOXING LANGDENG IMP&EXP CO.,LTD , https://www.ldfabric.com