Plastic Sheathed Copper Tube,PVC Sheathed Copper Tube,Plastic Coasted Copper Tube,PVC Coasted Copper Tube,PE Sheathed Copper Tube,We can supply tube-with-wire type, coated by PVC Sheath, as per customers` choice. The tube-with-wire type is unique design with our patent specially for CNG/LPG transport, which can improve efficiency and reduce cost for installation of Auto CNG/LPG system. Plastic Sheathed Copper Tube,PE Sheathed Copper Tube,PVC Sheathed Copper Tube,PE Coasted Copper Tube,PVC Coasted Copper Tube Taizhou Runde Company , https://www.zjbronzefittings.com
License plate recognition system equipment installation and wiring method
The license plate recognition system equipment installation and wiring method is convenient for the majority of license plate recognition system dealers, engineering companies, and users to install the license plate recognition system equipment smoothly and accurately when the equipment is installed, the smart license plate recognition system manufacturer is now self-installed The method is available for your reference!
Each entrance and exit is equipped with a camera column with a height of about 1.5 meters. The column is equipped with a special camera for license plate recognition. The camera lens points to the ground plate at about 3.5-6 meters in front of the lane.
The specific installation location is shown below.
Equipment installation location and wiring
The following figure is a standard one-in-one-out wiring diagram, which briefly describes the installation location and pipeline diagram of the pure license plate recognition system. The LED information screen uses TCP/IP communication. If the camera uses video stream recognition, the ground sense coil can be triggered without cutting the camera.
※ If the temporary car offline charging function is not needed, the LED information screen can use 485 transparent communication mode, and the LED screen communicates with the camera through 485.
As shown below: