Commonly reported in some literature its sewage pump and slurry pump has a high water efficiency, and some even close to the efficiency of the water pump, I have the following views: (2) Ordinary water pumps are designed for maximum efficiency, that is, the hydraulic structure parameters of a water pump are the best combination for maximum efficiency. For sewage pumps, slurry pumps and other special requirements of the pump efficiency can not exceed the same period of the efficiency of the pump. This comparison refers to the advanced level of contemporary rather than a person's level of design. (3) sewage pump, slurry pump efficiency is lower than the main reason for the pump is their over-flow channel widened. The decrease in efficiency is mainly related to the degree of broadening. Therefore, it is pointless to compare the efficiency of two different sewage pumps and slurry pumps (Q, H, n) without the limitation of capacity. (4) The widening of the sewage pump runner is to prevent clogging, so the efficiency of the original sewage pump is usually lower than that of the secondary sewage pump. According to the statistical results of the efficiency of the sewage pump with φ / DS = 0.6 ~ 0.8 and Q <600m3 / h, the author gives the efficiency formula under this condition [1] η = 0.78- (6.74Q) -0.32-0.29 (0.32-lg 0.013 ns) 2 Where Q - flow, m3 / h. φ - pump allows the size, mm. (5) The increase of mud pump runner mainly reduces the flow rate of two-phase flow in the runner to reduce the wear. Therefore, the strong abrasive slurry pump efficiency is usually lower than the efficiency of the soft mud pump. Such as Zigong Industrial Pump Co., Ltd. produced NG, ND pump is used for strong abrasive slurry, NQ pump is used to pump light mud. (6) It is suggested that given the efficiency of the sewage pump and the slurry pump, the minimum passing size is given to facilitate the comparison of the pump design level. It is suggested to establish the relationship of η = f (Q, ns, φ) sewage pump and slurry pump by experiment.
The trends of the Aluminum recycling industry
Unlike many other materials, aluminum more than pays for its own recycling in the consumer and industrial waste. because the demand for aluminum continues to rise and recycling aluminum saves more than 90 per cent of the energy required versus producing new metal.
What is the role of Metal Baler in Aluminum recycling?
The Aluminum scrap can be directly pressed into bales by using the Aluminum Metal baler from China factory YMSRECYCLING to make the high efficient metal recycling and increase the value of residual steel scrap.
Recycling metals also requires less energy than producing new metals. Also conserves natural resources. Recycling conserves diminishing natural resources.
How to choose a suitable metal baler?
The Y81 series Aluminum Scrap Metal baler could press all ferrous metals from steel to stainless steel can be recycled as well as non-ferrous metals such as copper, brass, and aluminium, with various sizes for option, high-density compression, compact and strong. Low energy consumption but fast production rate.
Y81 series hydraulic metal baler mainly include the following models.
Y81F (side turn discharge ), Y81T (side push discharge), Y81Q (front push discharge) and Y81S (Double main press ).
Y81F-Manual operation (Side turn discharge )
Y81F-Semi-automatic operation (Side turn discharge )
Y81T-Semi-automatic operation (Side push discharge )
Y81S-Semi-automatic operation (Double main press discharge )
We provide a variety of models of the hydraulic metal baler, With new technologies to raise the quality and reduce the price, which supports 24 hours fully automatic working environment.
CONTACT YMSRECYCLING
Aluminum Baler,Aluminum Scrap Metal Baler,Hydraulic Metal Baler,Aluminum Metal Baling Press Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com
(1) With the continuous improvement of theoretical research and the continuous deepening and accumulation of experimental conclusions, especially the application of two-phase flow theory, it is inevitable that the efficiency of sewage pumps and slurry pumps should be constantly improved.
The economics of aluminum contributes to its position as one of the most recycled metals in the World.
We also support the design and manufacture of other model versions upon request.
Y81Q-Manual operation (Front push discharge )
YMSRECYCLING offer economical and effective solutions to help you to process different metal scraps.
The Aluminum Metal Baling Press can be customized and extended according to the actual needs of your on-site.
Call us now on +86-15950122559
To start maximising your returns from your aluminum metal recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.