Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column Henan Carbons New Material Technology Co., Ltd. , https://www.kycarbon.com
You can use our parallel twin screw extruder for:
 polymer compounding and filler masterbatch making,
 engineering polymer and glass fiber reinforcement,
 functional and color masterbatch extrusion,
 cable compounds,
 shoe sole compounds,
 powder coating materials extusion,
 degassing and devolatilization,
 direct extrusion
Main features: 1. Die face water ring pelletizing is suitable for most filling or not-filling hot plastic material products,Â
because it formed water ring in the outer template, templates does not touch cooling water, this feature ensures uniformity of template temperature .2. As a result of die face hotcutting system, not only insure the sleek appearance of material particles, and because the pellets were in time water cooling after cutting, so that make compact structure, reduce equipment space.
 
Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
Mode
Screw Diameter
D(mm)Screw Length(mm)
L/D
Screw Rater
N(r/min)Motor Power
P(kw)Torque
T(N.m)Torque
Lvel
T/N3Capacity
Q(kg/h)
TSE-30B
31
Â
32-48
600
15
119
6.7
5-40
TSE-40B
41
160
32-52
600
30
239
5.8
90-150
TSE-52B
51.5
210
32-64
600
55
438
5.5
225-250
TSE-65B
62.4
240
32-64
600
90
716
5.1
200-300
TSE-75B
71
290
32-64
600
132
1050
4.8
350-550
TSE-75D
71
290
32-64
60O
220-250
1990
9.2
500-1000
TSE-95B
93
360
32-64
600
315
2506
5.3
800-1200
TSE-135A
133
Â
32-64
500
750
7162
5.38
1500-2250
You can use our parallel twin screw extruder for:
 polymer compounding and filler masterbatch making,
 engineering polymer and glass fiber reinforcement,
 functional and color masterbatch extrusion,
 cable compounds,
 shoe sole compounds,
 powder coating materials extusion,
 degassing and devolatilization,
 direct extrusion
Main features: 1. Die face water ring pelletizing is suitable for most filling or not-filling hot plastic material products,Â
because it formed water ring in the outer template, templates does not touch cooling water, this feature ensures uniformity of template temperature .2. As a result of die face hotcutting system, not only insure the sleek appearance of material particles, and because the pellets were in time water cooling after cutting, so that make compact structure, reduce equipment space.
Â
Our machine types:
1. Co-Rotating Parallel Twin Screw Pelletizing Extruders
2. Pelletizing Extruders
3. Die Face Cut (Air Cooling) Pelletizing Extruders
4. Double Stage / Double Degassing Recycling Extruders
5. Crushers, Mixers, Storage Tanks, Vibrators, Granulators, Blowers
6. Extruder spare parts
Mode
Screw Diameter
D(mm)Screw Length(mm)
L/D
Screw Rater
N(r/min)Motor Power
P(kw)Torque
T(N.m)Torque
Lvel
T/N3Capacity
Q(kg/h)
TSE-30B
31
Â
32-48
600
15
119
6.7
5-40
TSE-40B
41
160
32-52
600
30
239
5.8
90-150
TSE-52B
51.5
210
32-64
600
55
438
5.5
225-250
TSE-65B
62.4
240
32-64
600
90
716
5.1
200-300
TSE-75B
71
290
32-64
600
132
1050
4.8
350-550
TSE-75D
71
290
32-64
60O
220-250
1990
9.2
500-1000
TSE-95B
93
360
32-64
600
315
2506
5.3
800-1200
TSE-135A
133
Â
32-64
500
750
7162
5.38
1500-2250
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
200kg/H Double Screw Granules Making Screw Extruder
Model NO.: TSE75
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Screw Diameter: 71mm
Screw Elements: W6mo5cr4V2 Material
Screw Design: Modular Structure/Building
Nitriding: Ntrogen Treatment/Tempering
Application: Plastic Granulating
L/D: 48:1
Identification: Ce ISO 9001
Trademark: HS
Transport Package: Wooden Cases or Customized
Specification: CE ISO9001
Origin: Nanjing Jiangsu
HS Code: 8477209000
Model NO.: TSE75
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Screw Diameter: 71mm
Screw Elements: W6mo5cr4V2 Material
Screw Design: Modular Structure/Building
Nitriding: Ntrogen Treatment/Tempering
Application: Plastic Granulating
L/D: 48:1
Identification: Ce ISO 9001
Trademark: HS
Transport Package: Wooden Cases or Customized
Specification: CE ISO9001
Origin: Nanjing Jiangsu
HS Code: 8477209000
Low energy consumption twin screwextruder for PE fiber glass
EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.