D320 Diesel Pile Hammer,Pile Vibro Vibratory Hammer,D320 Diesel Pile Hammer With Tublar,D320 Tublar Diesel Pile Hammer CHINA JIANGSU JUWEI MACHINERY CO.,LTD , https://www.juweihammer.com
Treatment method: detect whether the collector brush wear is serious, replace the collector brush; replace the brush and re-adjust the connection node; use double brush collector; re-tighten the connection screw.
2, the brush wears fast mainly causes: The slide wire joint is not smooth; The carrying capacity is too big; The spring pressure is big.
Treatment method: Reconnect the guide rails as required; increase the number of current collectors; replace and correct the spring pressure.
3. Deformation of the guide rails, the main reason for the impediment of collector operation is that the ambient temperature is too high; the spacing between the lifting racks is large or loose.
Treatment method: Partially adopt heat insulation board, add outdoor sun visor; increase the number of lifting wires on the trolley wire, correct the conductor and tighten the screws.
The three common methods of Tianyi trolley line
1. Main reasons for disconnection of trolley wire: The brush is climbing in the conductor; the brush is worn badly and can not touch the conductor; the conductor connection is not even; the single collector uses; the guide rail connector is loose.