Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column Henan Carbon Road New Material Technology Co., Ltd , https://www.carbonmoldedgraphite.com
Â
SAJPZA08 Equal Cross Connector, Nickel-Plated Brass Push-to-Connect Fitting, 08mm Tube O.D × 08mm Tube O.D , Collet Material: H59 brass , Material of Construction: Nickel Plated Brass, Pressure (PSI) 1000, Temp Range -20 To 100 Deg , Weight : 60.00g,Height: 53.00mm,Nickel Thickness: 10um, O-ring: NBR-A , Package Quantity: 10Pcs. Warranty:18 months .
Cautions:
The repeatedly connecting or disconnecting the Nylon or PU Hose into Brass Nickel-PlatedPush in Fittings , which will cause the Scratches covered with Nylon or PU Hose ,The leakage is possible, the correct way is cut off the scratched Nylon or PU Hose end and insert it again to avoid the leakage.
Â
SAJPZA08 Equal Cross Connector, Nickel-Plated Brass Push-to-Connect Fitting, 08mm Tube O.D × 08mm Tube O.D , Collet Material: H59 brass , Material of Construction: Nickel Plated Brass, Pressure (PSI) 1000, Temp Range -20 To 100 Deg , Weight : 60.00g,Height: 53.00mm,Nickel Thickness: 10um, O-ring: NBR-A , Package Quantity: 10Pcs. Warranty:18 months .
Cautions:
The repeatedly connecting or disconnecting the Nylon or PU Hose into Brass Nickel-PlatedPush in Fittings , which will cause the Scratches covered with Nylon or PU Hose ,The leakage is possible, the correct way is cut off the scratched Nylon or PU Hose end and insert it again to avoid the leakage.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.
BSPT Brass Union Cross Nickel-Plated Push in Pneuamtic Fittings
Model NO.: SAJPZA10
Material: Brass
Model No: Sajpza10
Certification: ISO9001
Export Markets: Global
Fluid Type: Air(No Other Gases or Liquids)
Working Temperature: Normal Temperature
Negative Pressure: -29.5 in Hg
Operating Temperature: 0 - 60 C
Operating Pressure: 0 - 150 Psi
Condition: New
Trademark: SMARTSOLU
Transport Package: Plastic Bags, Carton
Specification: Brass BSPT thread
Origin: China
HS Code: 8412909090
Model NO.: SAJPZA10
Material: Brass
Model No: Sajpza10
Certification: ISO9001
Export Markets: Global
Fluid Type: Air(No Other Gases or Liquids)
Working Temperature: Normal Temperature
Negative Pressure: -29.5 in Hg
Operating Temperature: 0 - 60 C
Operating Pressure: 0 - 150 Psi
Condition: New
Trademark: SMARTSOLU
Transport Package: Plastic Bags, Carton
Specification: Brass BSPT thread
Origin: China
HS Code: 8412909090
Â
Â
Products' Description:
Â
Â
Products' Description:
EDM graphite, also known as graphite block for EDM, is a new type of material, which is now more and more widely used in the precision mold processing industry. At present, in mold processing plants in developed European countries, more than 90% of mold processing electrode materials are graphite. Copper, the once dominant electrode material, has almost lost its advantages compared with graphite electrodes.