Stearic Acid is a saturated fatty acid with an 18-carbon chain Acid Product. The IUPAC name is octadecanoic acid. It is a waxy solid and its chemical formula is C17H35CO2H. The salts and esters of Sodium Stearate stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid.The triglyceride derived from three molecules of stearic acid is called stearin.
In general, the Melamine Powder applications of Acid Octadecanoic stearic acid exploit its bifunctional character, with a polar head group that can be attached to metal cations and a nonpolar chain that confers Boric Acid Flakes solubility in organic solvents. The combination leads to uses as a surfactant and softening agent. Stearic acid undergoes the typical reactions of Triple Pressed Stearic Acid saturated carboxylic acids, a notable one being reduction to stearyl alcohol, and esterification with a range of alcohols. This is used in a large range of manufactures, from simple to complex electronic devices.
Stearic Acid,Sodium Stearate,Acid Octadecanoic,Triple Pressed Stearic Acid HENAN LIHAO CHEM PLANT LIMITED , https://www.lihaoche.com
In-pulse inclined well development plan
When using the in-diameter inclined well development scheme (Fig. 7-11 ), the inclined well is arranged in the ore body, and the inclined well is close to the position of the lower part of the ore body, and the inclination angle thereof is preferably the same as (or close to) the inclination angle of the ore body. The advantages of this development plan are: no need to dig into Shimen, short development time, and quick production; in the whole development project, at the same time, the by-produced ore is mined, and this by-product ore can offset part of the excavation cost; Helping to further explore. The disadvantages are: the ore body is irregularly inclined, especially the ore body is irregular, the wellbore is difficult to keep straight, which is not conducive to lifting and maintenance; in order to maintain the safety of the inclined shaft, a security pillar is required. Therefore, non-ferrous metal mining and precious metal mines, such programs not much use. Only those mines with abundant reserves and low ore value can be considered for use.