We
have got 220kV Transmission Line Substation Structure Quality Certificate from Power
Industry Steel Tower Qualified Inspection & Test Center from 2001
year. Our products are made from quality sheet through bending,
forming, automatic welding and hot galvanization. We can reach one-run
machining length of 14m and can bend sheet of thickness up to 45mm. We
adopt advanced welding procedures, automatically weld main joints and
reach rank-II welding quality. Substation Structure, Substation Steel Structure, Steel Tubular Substation Structures, Steel Structure For Substation Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com
Mechanical alloying was developed by Benjamin et al. at the end of the 1960s by the United States International Nickel Corporation. It was mainly used to prepare nickel-base and iron-base superalloys with both precipitation hardening and oxide dispersion hardening effects. In the early 1980s, American scientist Koch and his colleagues succeeded in obtaining Ni60Nb40 amorphous powder by means of mechanical alloying. Since then, the method has developed rapidly. After extensive experiments by W. Schlum and H. Grewe, it was proposed in 1988 that the mechanical alloying method could produce nanocrystals. Later, Fecht successfully fabricated nano-scale ultrafine-grained alloys using mechanical alloying methods, creating a new field of mechanical alloying technology. Nowadays, mechanical alloying methods have been successfully applied to the preparation of nano-scale ultra-fine grain dispersion strengthening materials, magnetic materials, superconducting materials, amorphous materials, nanocrystalline materials, light metal high-strength materials, and supersaturated dispersion solid solutions. Developed countries such as the United States, Germany, and Japan have invested a great deal of manpower, material resources, and financial resources. They have done a lot of research work and achieved remarkable results, and have already achieved industrialized production. US INCO has already established a mechanical alloying line for iron, nickel and aluminum oxide dispersion-strengthened alloys with a production capacity of 350t/year. The research work on mechanical alloying in China started in 1988 and has made remarkable progress in more than a decade.
Mechanical alloying
1 Basic principles
In 1988, Japan's Shinmiya Hideo proposed a rolling and refolding model. When the reduction rate is 1/a, after n times of rolling, the thickness is changed from the original d0 to d, and d=d0(1/a). For example, if the powders of the two elements are mixed and rolled 10 times and set to 1/a≈31 6296 by the mechanical alloy method, the particle size of the powder can be reduced to one hundred thousandth of its original thickness to form a very slight double layer overlap. The powder can be nanometer-sized fine structure after more calendering. Therefore, the mechanical alloying method may cause alloying of the powder in the solid state. In 1990, Atzmon proposed another principle of mechanical alloying. The mechanically induced self-propagating reaction mechanism is that the intermetallic compound is not a process of nucleation and growth, but suddenly formed. Because the ignition temperature of the combustion self-propagating reaction is related to the size of the powder particles and the grain size, the ignition temperature decreases as the size of the powder particles or grains decreases. As the powder particles or grains decrease to a certain extent, the local high temperatures created by mechanical collisions during ball milling can "ignite" the powder, manifesting itself as a sudden burst of alloy formation.
At present, it is generally believed that most mechanical alloying processes in ball milling are controlled by diffusion. The basic process of mechanical alloying is repeated mixing, crushing, and cold welding of powder particles. Mixtures of several metallic elements or non-metallic elemental powders will form high-density dislocations during ball milling, and the grains will gradually refine to nanoscale. This provides a fast channel for the interdiffusion of atoms and, under certain conditions, the nuclei of the alloy phase are formed. In the further milling process, all the elemental powders form an alloy phase and gradually grow.
Mechanical alloying powder material has a good application prospect
Mechanical alloying (abbreviated as MA) is a powder technology that produces alloy powders or composite powders with balanced or non-equilibrium phases from elemental powders. It is in a high-energy ball mill, where very intense grinding occurs between powder particles and between powder particles and grinding balls. The powder is broken and torn, and the newly formed surfaces are cold-welded to each other and gradually alloyed. Repeatedly, eventually achieving the purpose of mechanical alloying.