Slurry pump to determine the flow of the following three points: 1, slurry pump production process has been given the smallest, normal, maximum flow, should be considered the maximum flow. 2, the production process only gives normal flow, should consider leaving a certain margin. 3, the basic data only to the weight flow, should be converted into volume flow. Therefore, to better determine the flow of slurry pump, can improve work efficiency. Search Keyword: More Pump Technical Articles Aluminum Profiles For Southeast Asia Aluminum profiles for windows and doors are stronger, better insulated and last longer than traditional wood and steel frames and come in a variety of colors and styles. They are also highly resistant to rust and corrosion, which means they can last for decades without much maintenance. Aluminum profiles are also very energy efficient. It is an excellent choice for doors and windows of all sorts of buildings. 8020 Aluminum Extrusion,V Slot Extrusion,Aluminum Channel Extrusions,2020 Aluminum Extrusion Foshan Knilex Aluminum Co., Ltd. , https://www.aluprofilefactory.com
For ns> 100, the high flow rate is low, and the flow margin is 5%. For small flow pump with ns <; 50, the flow margin is 10%, the pump with 50≤ns≤100, the flow margin Also take 5%, poor quality and poor operating conditions of the pump, flow margin should be taken 10%.