Double-Cone Rotary Vacuum Dryer
As a professional drying equipment manufacturer, we provide more than hundred sets of equipment for our users. The heating media such as high temperature heat transfer oil, middle temperature steam and low temperature hot water are available for our products. When drying viscous materials, we can design the special [copying" mechanism or set balls in the tank for you.
Applications:
It is suitable for concentration, mixing and drying of powder, granular and fibrous materials in such industries as chemical industry, medicine, food, etc., and materials that require low temperature drying(such as biochemical products), and is more suitable for drying of materials that are easy to oxidize, volatize, heat sensitive materials, irritant and poisonous materials, and materials in which breaking of crystals is not allowed.
Principle:
• After the heat source(such as hot water, low pressure steam or heat transfer oil) is connected to the closed jacket, the heat is transferred from the inner shell to the materials to be dried.
• Driven by the power, the tank makes slow rotation and the materials in the tank are continuously mixed so as to realize the purpose of drying.
• When the materials are under vacuum, the steam pressure reduces to make the moisture(solvent) on material surtaces reach the saturation status and evaporate, and discharged and recovered timely from the vacuum pump. The moisture(solvent) inside the materials is penetrated, evaporated and discharged towards the surfaces. The three processes are carried out continuously, so that the materials are dried within a very short time.
Features:
• During oil heating, automatic constant temperature control is adopted to dry biochemical products and mineral raw materials.
Temperatures vary within the range of 20-160℃.
• The heat efficiency is 2 times higher than that of common ovens.
• Indirect heating will cause no pollution to the materials, conforming to GMP requirements. The equipment is simple to repair and operate and easy to clean.
Double-Cone Rotary Vacuum Dryer,Rotary Cone Vacuum Dryer,Double Cone Vacuum Dryer,Double Cone Vacuum Dryer Machine Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jiruimachine.com
Li Pumin, secretary general of the National Development and Reform Commission of China, stated on the 17th that the Chinese auto industry has maintained an average annual growth rate of over 10%. It is estimated that the domestic civil car ownership will reach 200 million by 2016. According to the development of developed countries' car ownership and remanufacturing industry, the Chinese auto parts remanufacturing industry will usher in a good market development prospect. .
Li Pumin made the remarks at the launching ceremony of the theme of "remanufacturing products (auto parts and components) into the auto parts city".
The re-manufacturing theme publicity activities were approved by the National Development and Reform Commission and co-sponsored by the China Economic Herald and other institutions. The event will be held on the theme of “Hand in Hand Auto Parts City to Promote Remanufacturingâ€. From November 17 to 28, it will be held in the four cities of Beijing, Jinan, Nanjing, Shanghai, Hangzhou, Xiamen and Guangzhou (4S stores). Remanufactured products (auto parts and components) entered the Auto Parts City theme promotion day to promote remanufactured industry policies, technology, and industry development, allowing remanufactured products to penetrate the market.
Li Pumin stated that the development of recycling economy is a major strategic decision of China and is a major measure to implement the strategic plan for the Party's 18th National Congress to promote the construction of an ecological civilization. It is to speed up the transformation of the economic development model and build a resource-saving and environment-friendly society. The inevitable choice for sustainable development. The remanufacturing of auto parts is an important content and concrete practice for China to promote the development of circular economy. It is also an active and effective measure adopted by the automobile market in economically developed countries. Remanufacturing has become an important industry.
He stressed that he hopes that more industrial enterprises will have a deeper understanding of the state's industrial development policy on remanufacturing, and have further understanding of the important support for the establishment of a circular economy system in this industry, and actively join the remanufacturing industry. At the same time, it also hopes that more consumers will recognize remanufactured products and use remanufactured products. Through the joint efforts of countries, producers and consumers, we will actively build a healthy and orderly development of the remanufacturing industry market.
According to relevant experts, remanufacturing refers to the use of high-tech technology to professionally repair or upgrade old mechanical and electrical products to make them return to mass production processes that are as good as or better than new products.
A few days ago, the National Development and Reform Commission and other five ministries and commissions issued the "Circular on Implementing the Pilot Project for Remanufacturing Remanufactured Products" to provide favorable support and promotion for further expanding the market share of remanufactured products.