Power spinning is also called thinning spinning. Power spinning is a non-cutting processing method developed on the basis of ordinary spinning. When spinning, use the tail top to fix the blank on the mold. When the mold rotates, the rotating wheel makes a feeding motion, so that the blank continuously becomes thinner point by point and abuts against the mold to form a part of the required shape. Power spinning realizes the forming of the workpiece by changing the thickness and shape of the blank. Heavy Duty Spinning,Cnc Metal Spinning,Metal Spinning Machine,Metal Spinning Lathe Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hosdunmachinetools.com
If a third-party liability accident occurs in an insurance vehicle and causes personal injury or death to a third party, the "Rules for the Handling of Road Traffic Accidents" (Decree No. 89 of the State Council of the People's Republic of China on September 22, 1991), relevant laws, regulations and insurance contracts It is stipulated that the amount of compensation shall be determined by the amount of compensation set out in the insurance policy. The insurance company has the right to re-approve or refuse compensation for the amount of compensation that the insured has promised or paid.
The insured shall provide the insurance company with a “Notification of Motor Vehicle Insurance Risksâ€, an insurance policy, an accident certificate, a certificate of accident liability, an accident mediation, a judgment, a list of losses, and related expense documents.
Involving third party personal casualties, it is also necessary to provide a hospital diagnosis certificate, a certificate of invalidity, a death certificate, a certificate of late work and loss of work, family members and proof of the status of the income. After the insurance vehicle has been stolen for three months, the insured will provide the "motor vehicle insurance risk notification" and insurance policy to the insurance company, and provide the public security agency and the municipal public security agency when handling the claim. Certificates issued by the criminal investigation department, as well as necessary documents such as driving licenses, original purchase invoices, vehicle purchase surcharge payment certificates and payment receipts, road maintenance fee receipts, access to the “motor vehicle parking certificate†receipts by the municipal highway authority. The insured person shall not submit the provisions listed in the motor vehicle insurance clause and the stolen emergency insurance clause within three months from the day the insurance vehicle is repaired or the traffic accident handling is completed and the criminal investigation department of the municipal public security bureau issues the vehicle robbery certificate. The necessary documents, that is, as a voluntary waiver of rights and interests. The insurance company is responsible for the direct damage to the insurance vehicle and the third party property, as well as the personal injury or death of the third party according to the responsibility of the insured (or the driver) in the accident; the financial compensation is given according to the size of the accident. Vehicle Loss Insurance and Third Party Liability Insurance shall implement absolute deductible rates within the amount that meets the compensation requirements: 20% for full-cost deductibles, 15% for primary liabilities, and 10% for unequal liabilities. Loss of 5% of negative secondary responsibility.
On airplanes, various nose covers, auxiliary fuel tanks, air intakes, gas cylinders, tie rods, slide rails, and actuators are all formed by spinning. In the engine, most of the propeller cap, casing, lip, intake cone, nozzle, nozzle, etc. are also formed by spinning. Such parts have complex structures, special raw materials, and large product sizes. The use of spinning forming can improve the integrity of structural components, reduce welds and component deformation, and reduce the workload of manual calibration. More importantly, due to the increased strength of the material after spinning, the design wall thickness of the parts can be reduced, thereby reducing the weight of the whole machine and improving the reliability of the whole machine.
Motor Vehicle Insurance Claims
When the insured vehicle has an accident clause, the insured shall take reasonable protection and rescue measures, and immediately report the case to the public security traffic control department where the accident occurred, and notify the insurance company at the same time. When an insurance vehicle has stolen the entire vehicle, the insured shall immediately (within 24 hours, excluding force majeure) report the case to the criminal investigation department of the insurance company and the public security organ. After reporting the case to the insurance company, the insured shall send a person to the insurance company claims department to obtain the “motor vehicle insurance risk notificationâ€, fill in the listed contents in detail, and stamp the seal. The insurance vehicle should be repaired as soon as possible due to the occurrence of the accident listed in the insurance clause or the damage to the third party property (such as a vehicle). Before the repair, the insured must check with the insurance company to determine the repair items, methods and costs. Otherwise, the insurance company has the right to re-approve or refuse compensation.