Radius Cutting Machine is designed to perform saddle cuts on plastic pipes made of HDPE, PP, PVDF. Radius Saw is the ideal cutting device to match hdpe Saddle Fusion welding machine. Radius cutter performs precise radial cuts and allows a fast configuration of the cutting radius before reducing tee fabrication. Radius Cutting Saw is used to cut branch pipes used in production of reducing tees and manifolds. How to choose Radius Bandsaw? Reducing tee is composed of main pipe and branch pipe. You should confirm branch pipe range and pipe thickness, then choose the relevant type from Wuxi Yuda MQJ series hdpe pipe arched surface cutter. We offer MQJ315 radius cutter machine for branch pipe 90-315mm arc cutting, MQJ630 hdpe saddle saw machine for branch pipe 315-630mm radius cutting. For PE Saddle Fabrication, Plastic Pipe Radial Cutting Device is essential.
We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for to attain continual success based on quality, reliability, integrity, and complete understanding of market dynamics.
Radius Saw,Radial Cutting Saw,Radial Cutting Machine,Radial Cutter Machine WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com
Centrifugal jig
The centrifugal jig is a re-election new equipment developed and produced by the North Mine Institute. The traditional jig is difficult to select -74μm material, and in the powerful centrifugal force field of the centrifugal jig, even particles as fine as 10μm can enter the effective sorting state. It has the advantages of selected grain width, strong adaptability, small difference in separation efficiency, low production cost, no environmental pollution, small floor space and large processing capacity. It is also used to treat mud minerals, lean ore and old tailings. Excellent equipment. Application abroad in iron ore, coal mining, placer gold ore, tungsten ore, lead and zinc tailings, flotation tailings and other sulfide minerals have achieved a good indicator.
The centrifugal jig developed by the North Mine Institute has the following characteristics: 1 The separation body adopts the split structure and the rotation weight is light; 2 The concentrated pulsation mechanism generates the pulsating water flow through the outer diaphragm, balances the diaphragm pressure with the pre-stress; Ring protection screen, bed; 4 no room jigging; 5 special sealing structure to solve the water leakage under the screen.
The machine has obtained national patents. The technical parameters of the centrifugal jig are as follows:
Model LT-1 LT750
Screen inner diameter / mm 436 750
Screen size / mm 0.1, 0.3, 0.6 0.1, 0.3, 0.6
Screen speed / (r / min) 0 ~ 815 0 ~ 580
Centrifugal strength / times 0~150 0~133
Stroke / mm 0~10 0~5.6
Rush times / min-1 0~1800 0~1850
Rotating motor power / kW 7.5 55
Pulsating motor power / kW 5.5 7.5
Processing capacity / (t / h) 3 ~ 5 8 ~ 10
The centrifugal jig is suitable for sorting various minerals in fine-grained and coarse-grained grades; it is an ideal equipment for secondary development of old tailings.