Induction Quenching Machine Tool for Shafts

<

Trademark: ZHENGXIN
Specification: CE, SGS
Origin: Dongguan, Guangdong, China
HS Code: 8514400090
Trademark: ZHENGXIN
Specification: CE, SGS
Origin: Dongguan, Guangdong, China
HS Code: 8514400090
Induction Quenching Machine Tool for Shafts
Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
 
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
 
2.Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
 
3. Various electric tools, such as gear and axes.
 
4. Quench for machine tools, such as lathe deck and guide rail.
 
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
 
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Functional features:
1. Industrial digital control system, advanced performance, easy to use debugging, to meet the maximum etent of the comples workpiece quenching needs;

2. Quenching ways: continuous scan quenching, quenching at the same time, piecewise continuous scan hardening(segmented by the program settings, without limit switch, the same below), sub-quenching;

3. The electrical control system of the machine for which the quenching and cold water control interface, according to the technical requirements of the quenching process and cooling process control;

4. Low running costs and low drive power of workpiece running motor;

5. Profiles fuselage structure, low cost , light weight, economical and practical;

6. Easy maintenance, low failure rate, no leakage;

7. The high degree of automation, high procuction efficiency;

8. Rail linear bearings, high precision, low friction, long life;

9. Balance weight of counterweight device by sprockets and chains.
 
Main technical parameters:
 
Max workpiece diameter 300mm The max weight of workpiece 50kg
The workpiece speed 1 - 30mm/s  workpiece descent velocity 120mm/s
Total power of machine motor 1.5kw Spindle speed 1 - 200rolling/min
Cooling method Immersion & Spray Product Weight On/About 900 kg
Product Size L 1100*W 900*H 2000  Operation method Mechanical rotational
Induction Quenching Machine Tool for ShaftsInduction Quenching Machine Tool for Shafts
Induction Quenching Machine Tool for Shafts
Heat Treatment (surface quench):
It is mainly aims to change the rigidity of the metal materials through the heat treatment to work pieces. Detail applications are stated as follows:
 
1. Quench for various hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
 
2.Quench for various automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
 
3. Various electric tools, such as gear and axes.
 
4. Quench for machine tools, such as lathe deck and guide rail.
 
5. Quench for various hardware metal parts and machined parts, such as shaft, gear (chain wheel), cam, chuck and clamp etc.
 
6. Quench for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Functional features:
1. Industrial digital control system, advanced performance, easy to use debugging, to meet the maximum etent of the comples workpiece quenching needs;

2. Quenching ways: continuous scan quenching, quenching at the same time, piecewise continuous scan hardening(segmented by the program settings, without limit switch, the same below), sub-quenching;

3. The electrical control system of the machine for which the quenching and cold water control interface, according to the technical requirements of the quenching process and cooling process control;

4. Low running costs and low drive power of workpiece running motor;

5. Profiles fuselage structure, low cost , light weight, economical and practical;

6. Easy maintenance, low failure rate, no leakage;

7. The high degree of automation, high procuction efficiency;

8. Rail linear bearings, high precision, low friction, long life;

9. Balance weight of counterweight device by sprockets and chains.
 
Main technical parameters:
 
Max workpiece diameter 300mm The max weight of workpiece 50kg
The workpiece speed 1 - 30mm/s  workpiece descent velocity 120mm/s
Total power of machine motor 1.5kw Spindle speed 1 - 200rolling/min
Cooling method Immersion & Spray Product Weight On/About 900 kg
Product Size L 1100*W 900*H 2000  Operation method Mechanical rotational
Induction Quenching Machine Tool for ShaftsInduction Quenching Machine Tool for Shafts

PE WAX

As a lubricant, it has stable chemical properties and good electrical properties. Used as a lubricant for cable insulation materials, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding. Main scope of application: Can be widely used in the manufacture of masterbatch, granulation, plastic steel, PVC pipe, hot melt adhesive, rubber, shoe polish, leather brightener, cable insulation, floor wax, plastic profiles, ink, injection molding and other products.

Application of polyethylene wax
1. Dense color masterbatch and filling masterbatch. As a dispersant in the processing of color masterbatch, it is widely used in polyolefin masterbatch. It has good compatibility with polyethylene, polyvinyl chloride, polypropylene and other resins, and has excellent external and internal lubrication.
2. PVC profiles, pipes, composite stabilizers are used as dispersants, lubricants and brighteners in the molding process of PVC profiles, pipes, pipe fittings, PE.PP to enhance the degree of plasticization, and improve the toughness and surface smoothness of plastic products And it is widely used in the production of PVC compound Stabilizer.
3. The ink has good light resistance and chemical properties, can be used as a pigment carrier, can improve the abrasion resistance of paints and inks, and improve the dispersion of pigments and fillers. It has a good anti-settling effect. It can be used as a flattening agent for paints and inks. The product has good gloss and three-dimensional effect.
4 Wax products are widely used in the production of various wax products such as floor wax, car wax, glazing wax, candles, crayons, etc., to increase the softening point of wax products, increase their strength and surface gloss.
5. Cable material Used as a lubricant for cable insulation materials, can enhance the diffusion of fillers, increase the extrusion molding rate, increase mold flow, and facilitate demolding.
6. Hot-melt products It is used in various hot-melt adhesives, thermosetting powder coatings, road marking paints, marking paints, as a dispersant, has a good anti-settling effect, and makes the products have a good gloss and three-dimensional effect.
7 Rubber As a rubber processing aid, it can enhance the diffusion of fillers, increase the extrusion molding rate, increase the mold flow rate, facilitate demolding, and improve the surface brightness and smoothness of the product after the film is released.
8 Cosmetics Make products have a good gloss and three-dimensional effect.
9 Injection molding, saving machine power lubrication, and enhancing the surface gloss of products

Pe Wax,Pe Polyethylene Wax,Chemical Pe Wax,Polyethylene Wax

Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com