In traditional machining, there are two meanings of positioning: First, the state of the workpiece during the machining process (the position and attitude of the workpiece on the machine tool) is specified in the process design stage; second, the necessary process is passed during the machining process. Process means (such as designing precision fixtures and manual alignment as described above) to ensure that the actual state of the workpiece matches the pre-specified state. Obviously, this is a hardware-based passive positioning method. Correspondingly, the basic concept of software locating processing is that the precise position and posture of the workpiece should not be specified before processing, so that it is not necessary to use precision fixtures to ensure the actual workpiece. The state is in accordance with the established state, and the workpiece can be processed by simply and intimately fixing the workpiece to the machine table with simple fastening components and devices (such as bolts, pressure plates, vise, etc.). The trajectory of the tool during software positioning is generated in real time based on the actual state information of the workpiece, rather than being determined in advance as in the conventional positioning processing mode. That is to say, software locating processing is performed based on a manufacturing operation mode such as locating processing. The search here is to actively find the position of the workpiece and determine its posture. This operation includes two aspects, one is to quickly obtain the surface information of the workpiece by using the sensor, and the second is to accurately solve the actual state of the workpiece according to the acquired surface information of the workpiece. The processing here is not a digital program control (NC) process in the ordinary sense, but a pose adaptive processing realized by real-time generation of tool motion trajectory based on workpiece locating information without a predetermined program. It should be pointed out that although the workpiece can be fixed in the locating process, in order to facilitate the positioning and processing, it must be implemented according to the locating process specification (different from the positioning process). The workpiece is fixed. From the characteristics of software locating processing, it can be seen that in the manufacturing system using software locating processing technology, since the hardware device such as the precision fixture does not passively and rigidly constrain the state of the workpiece on the machine tool, the workpiece is allowed to be suitable. Ground and non-precisely fixed on the machine tool, from the perspective of information and control, actively and flexibly obtain the actual state information of the workpiece, and based on this, control the machining process to process qualified parts, which overcomes the basis The drawbacks of traditional manufacturing techniques for positioning processing modes. (Finish) Malic ACID is an organic compound with the molecular formula C4H6O5. It is a dicarboxylic acid that is made by all living organisms, contributes to the sour taste of fruits, and is used as a food additive. Malic acid has two stereoisomeric forms (L- and D-enantiomers), though only the L-isomer exists naturally. The salts and esters of malic acid are known as malates. The malate anion is an intermediate in the Citric Acid cycle. l-malic acid is used to resolve α-phenylethylamine, a versatile resolving agent in its own right. Malic Acid 99%, L-Malic Acid, DL-Malic Acid HENAN JINHE INDUSTRY CO.,LTD , https://www.hnironoxide.com