Site selection and construction of electronic platform

<

Buying an electronic weighbridge is not the same as buying another product. To do an address, let's talk about the location selection and construction of the electronic weighbridge today. We hope that reading will help you:

First, the problem of installation site selection The location of the electronic loadometer is crucial. We mainly summarize the following points:

1. The wind tunnel should be avoided as much as possible, because the wind power will affect the accuracy of weighing at level 4 or above;

2. Electronic platform scales are afraid of flooding and moisture and should avoid waterways;

3. Avoid high-voltage wires because electronic scales under the high-voltage lines are susceptible to interference when it rains.

4. As far as possible, both sides of the electronic weighbridge should have a straight slope that is not less than the length of the pound body. Do not turn sharp corners, otherwise it will affect the normal use of the electronic weighbridge.

Second, the basic construction problems The basis of electronic scales, whether it is the size of the error or the error of the base surface, are very strict requirements, the basic construction unit must be clear in the case of basic drawings, in strict accordance with the requirements of the drawings construction, do not understand the problem, Consultation with the manufacturer or the local measurement department can never be sloppy and reduce the quality of the construction, which will affect the metering performance of the electronic platform.

Molybdenum Rod

The main features of molybdenum rods include high melting point, good thermal conductivity, low thermal expansion performance, good high temperature oxidation resistance, and high temperature strength.

Molybdenum can increase steel`s corrosion resistance in the acid-based solutions and liquid metals, thus improve its wear resistance, hardenability, weldability, and heat resistance. As an element which easy to form carbides, molybdenum can effectively avoid oxidation during steel making process, and it can be used alone or mix with other alloy element to achieve the best performance.

High temperature smelting additives

Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com