2012 Electric Motorcycle Industry Market Research Perspective

<

China Industry Research Network Industry Research and Information: In March 2009, the State Council issued the Implementation Plan for Auto and Motorcycle Going to the Countryside, which allowed the motorcycle companies to see the direction of advancement. After just one year, the electric vehicle was also incorporated into the home appliance. In the countryside, the advantages of government subsidy for motorcycles disappeared without a trace. In the face of large-scale attacks on electric vehicles, motorcycle companies are in no help. Of course, these alone are not enough to make motorcycles on the verge of dying. The rising prices of motorcycles and the price of oil are undoubtedly worse. Faced with low-cost, convenient and energy-saving electric vehicles, will consumers buy motorcycles again? Returning to the international environment, with the growing concern from all walks of life over the global pollution issue and the increasing tension in energy, although the current domestic auto market still has 5 years of development space, the national “Twelfth Five-Year Plan” has clearly defined the automobile industry. The focus of industrial development is on new energy vehicles, and some major countries around the world have made similar decisions and adjustments. For the motorcycle industry that belongs to the automotive industry, naturally, it is necessary to make decisive decisions and follow up the development strategy quickly. Moreover, the state has already issued some standards for electric motorcycles at the beginning of the year, and the Ministry of Industry and Information Technology of China, the Ministry of Industry and the Ministry of Industry and Information Technology, has issued initial specific guidelines for electric motorcycle products in 2010. The National Certification and Accreditation Commission has formulated relevant electric motorcycles.” 3C" standard and so on. All these indicate that new energy will be the development direction of our country and even the world.

According to the data of the “2012-2016 Electric Motorcycle Project Business Plan” issued by China Industry Research Network, China’s imported electric motorcycles and electric assist bicycles totaled 435 units in 2011, a year-on-year decrease of 10.86%; the import amount was only RMB 254,000. The US dollar decreased by 77.06% year-on-year. In 2011, China imported 35,000 U.S. dollars for electric motorcycles and electric power-assisted bicycles, accounting for 13.83% of the total imports; followed by Italy, Germany, the United States, and other countries or regions. In 2011, China exported a total of 1.41 million electric bicycles and electric power-assisted bicycles, a year-on-year decrease of 13.67%; the export value reached 400 million U.S. dollars, an increase of 2.20% year-on-year. In 2011, the top three destinations of electric bicycles and electric bicycles for export in China were the Netherlands, Germany and the United States, which accounted for 14.33%, 12.68% and 10.58% of the total exports respectively. From January to December 2011, the import price of electric bicycles and electric assist bicycles in China was US$583.92 per vehicle; the export price was US$285.5 per vehicle.

Current Status and Trend Forecast of Electric Motorcycle International Market

In recent years, international environmental protection and energy conservation issues have been receiving increasing attention, coupled with soaring oil prices. As a result, countries have launched relevant counseling policies for the electric vehicle industry in an attempt to develop mobile tools for pure electric power in order to get rid of dependence on oil and respond to environmental protection trends. . At the same time, pure electric vehicles have benefited from breakthroughs in battery technology, and their endurance has been effectively improved. Together with the deliberation and research and development of car manufacturers, the mass production version of the electric car finally came out at the end of 2010.

With the promotion of policies and the depot’s efforts, electric vehicle sales are booming. This article has collected the overall market overview of electric vehicles in the first half of 2011 to help understand consumer acceptance of electric vehicles. This article classifies EV products into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs) and pure electric vehicles (BEVs). The following will outline the development of the electric vehicle market in 2011.

HEV's global sales doubled, and the rise of PHEV and BEV market

HEV benefits from soaring oil prices. Market sales continue to heat up. The world's first HEV: Toyota Prius, the cumulative sales volume has exceeded 2 million units in September 2011 (2010), and the popularity is self-evident. Major car manufacturers also responded to this trend and launched a large number of HEV models to seize the auto market. Global HEV sales jumped from 157,000 in 2004 to 735,000 in 2010, a growth rate as high as five times.

With the increase in sales of HEVs, the demand for BEVs and PHEVs has begun to surface. In the first half of 2011, BEVs and PHEVs together accounted for 6.1% of electric vehicles. It is evident that the market is highly receptive to motor vehicles with motors as the main driving force. Among them, BEV's hot car models are Nissanleaf and Mitsubishii-MiEV, and PHEV models are GMvolt. In the first half of 2011, the sales volume was 9,868,1466 units and 2745 units respectively. The total sales volume of these three vehicles exceeded 14,000 units.

BEV and PHEV mainstream car sales BEV+PHEV share 6.1% of electric vehicles

Multiplication of production and sales of BEV and PHEV

As leaf, volt and i-MiEV received widespread feedback in the market, their manufacturers are confident in the prospects for electric vehicles and have begun to expand their existing electric vehicle production capacity. Nissan has invested US$1.6 billion in the Smyrna plant in Tennessee, USA, to upgrade and expand the battery modules required for the production of the leaf. It is expected that the capacity of 200,000 lithium-ion battery modules and 150,000 leaf vehicles per year will be reached in 2012. GM started upgrading the Detroit assembly plant. Upon completion of the upgrade, the combined capacity of volt and another HEV model "OpelAmpera" will increase to 16,000 units, and it is expected to increase to 60,000 units by 2012.

Electric vehicle sales forecast compound growth rate up to 25% over the next decade

According to the research reports of Markline and IIT, electric vehicle sales will grow at a CAGR of 25% per year, and sales will reach nearly 4 million units in 2020, of which HEV, PHEV and BEV account for approximately 44.8% respectively. , 18% and 37.2%. In the early stage of the development of electric vehicles, for consumers, due to the high prices of BEVs and PHEVs, which have reduced their market competitiveness, HEVs that are similar to engine car use methods have remained the mainstream of sales for the last ten years. In the future, with the decline in battery prices and the construction of charging stations, the market share of BEV and PHEV will gradually increase.

In 2012, it will be the first year of BEV and PHEV mass production. The main reason is that BEVs and PHEVs from large automakers are entering the mass production phase. The total estimated total production capacity of Nissan, GM and Mitsubishi can easily exceed 300,000 thresholds. Has reached half of the spectrum of HEV sales in 2010.

In 2011, the electric car boom has already struck. In terms of demand, the overall market demand for electric vehicles is quite strong. HEV sold nearly 250,000 vehicles in the first half of the year, and BEV and PHEV will also challenge 30,000 vehicles in total in the whole year; as the supply side observes, major car manufacturers scrambling to cut into electric vehicles. In the field, the local depot has rapidly expanded its production capacity, and the depots have also actively entered the blue ocean. It is believed that after the electric vehicle products gain the consensus of the market and manufacturers, the sales volume will grow at a double speed.

Screw Conveyor

Quantum has extensive experience in the correct selection and design of screw conveyors, screw dischargers, hopper unloading and screw metering systems. The above list is typical of the type of equipment we have supplied to a variety of industries for varying applications. Whether your process and application requires mixing during conveying, dewatering, batch metering interlocked to weigh system or conventional transfer conveying we have the experience and standard equipment to ensure you have a reliable trouble free installation.


QUANTUM designs and supplies a complete range of Screw Conveyors.

These types include:

• Conveying and transfer conveyors:

• Inclined Screw conveyor

• Horizontal Screw conveyors

• Storage Hopper Discharging & Live Bottom Bin Discharging systems

• Hopper Discharge

• Dosing and metering screw dischargers

• Twin Shafted Screw Conveyors

• Dewatering and compacting screw conveyors

• Batch metering screw feeders with self-emptying storage hoppers.

• Shaftless Screw Conveyors (Auger Covneyors)


Quantum have specialized screw conveying systems installed in chemical, mineral as well as the food and beverage industries. Our designs cater for stainless steel, mild steel with liners and special steel for abrasive materials, through to fully polished, sanitary clean down applications requiring full clean out and knock down construction. Materials handled can be micro powder to granular and lumps. The selection and type of conveyor recommended is critically dependent on the material to be conveyed.


Conveying and Transfer Conveyors:

Quantum manufacture a standard range of screw conveyors incorporating intermediate center bearings or center less screw conveying for difficult sticky materials. Length of conveyors and size of conveyor depends on capacity and material characteristics.


Inclined and vertical conveying:

Quantum have designed and installed both vertical and inclined screw conveyor systems. It is recommended to design all incline conveyors without using an intermediate bearing, if possible and to keep incline to less than 75o for optimum efficiency. Whether your application requires a tubular inclined conveyor or trough conveyor, Quantum will select the most suitable conveyor for your application that is suited to the material characteristics, environment, length conveyed and your specific needs such as clean down and residue. Efficiency of vertical conveyors can be as little as 10% and generally require specific design considerations; the nature of material and feed method. Our engineers can assist with the best and most suited conveyor for your needs.


Horizontal transfer conveyors

A single conveyor can incorporate several hanger bearings over length in access of 100m. However length is very much dependent on the nature and characteristics of the material and the conveying capacity. Some materials cannot be successfully conveyed using any hanger bearings, whilst other materials will accommodate several hanger bearings trouble free. We has a general rule of maximum conveyor percentage full by volume be no more than 40% when using hanger bearings with no more that 1mm/m deflection of center pipe. Quantum design all conveyors for full load start up with much consideration given to conveyor speed to eliminate excessive wear. All our conveyors are designed with gland seal packing to protect spherical bearings.


Hopper and Live Bottom Bin dischargers

Our hopper and Bin dischargers are used when non free flowing materials need to be discharged from hoppers or storage bins. Size and quantity of screws depend on the hopper configuration and the material characteristics. Using multiple screw dischargers can increase volume of hoppers whilst ensuring a positive discharge of material at a controlled out feed. Each screw can be independently powered or interlocked with one or two drive assemblies depending on loading and capacity of the system.

Generally installed with slow speed counter rotating screw flights that can be over locked for maximum discharging capabilities they are variable pitch or variable flight diameters to ensure even material discharge across hopper.


Heating and Cooling Jackets

All Quantum Screw Conveyors can be fitted with heating and cooling jackets utilizing steam, thermal liquids, refrigerant, water or brine. Heating or cooling can be designed by our process engineers who will recommend the most suitable size and type of conveyor for your production and needs.


Clean Design

Quantum is familiar with the specific needs of the food and beverage industries. All our Screw Conveyors can be fitted with CIP spray balls and manifolds, with quick knockdown in mind to ensure complete clean-down where required. Screw Conveyors can be constructed from mild steel, 304 or 316 stainless steel, depending on the material being conveyed. Surface finish will be provided to suit specific requirements. All components such as IP ratings of electric motors and switches are selected with these specific requirements in mind to ensure compatibility with your operating procedures.


After sales support

Quantum can provide a customized service contract using experienced technicians with many years` experience in servicing and troubleshooting Screw Conveyors in all states. This service ensures your equipment is functioning to its optimum capabilities and reduces down time due to parts replacement and potential damage. Our technicians have standard customer maintenance, checking and reporting procedures.

Screw Conveyor,Tubular Screw Conveyor,Single Shaft Screw Conveyor,Twin Shafted Auger Conveyor

Quantum Conveying Systems Yangzhou Co.,Ltd. , https://www.yzconveying.com