If you want to use a tensile testing machine to get the exact number you want, then you must carefully read the following detailed operating procedures for tensile testing of tensile testing machines: (1) Select and install clips; If you can skillfully operate according to the above tensile testing machine operation procedures , the data obtained is accurate and reliable. If there are other problems, you can log in our website Xiamen Haida Precision Instrument Co., Ltd. We are honored to be service. Powder coating is a type of coating that is applied as a free-flowing,
dry powder. The main difference between a conventional liquid paint and a
powder coating is that the powder coating does not require a solvent to
keep the binder and filler parts in a liquid suspension form. The
coating is typically applied electrostatically and then cured under heat
to allow it to flow and form a "skin." The powder coating process is
used to create a hard finish that is tougher than conventional paint,
making it more resistant to scratches, chipping, and fading. It is
commonly used on metals, such as aluminum, steel, and iron, as well as
on household appliances, automotive parts, and outdoor furniture. Powder
coating is an environmentally-friendly option as it produces less waste
and emissions than traditional liquid coatings. Powder Coating,Galvanized Iron Sheet,Sheet Metal,Decorative Metal Sheets Suzhou Gold ant Precision Sheet Metal Co.,Ltd , https://www.sgpsheetmetal.com
(2) Boot in sequence: Monitor → Printer → Computer → IPC → Start Test Software → Hydraulic Source;
(3) Enter the test window, select the test program; measure the sample size, enter the relevant test parameters;
(4) Mounting specimens;
(5) Install an extensometer to measure the elastic modulus and specify the non-proportional extension strength;
(6) The sensor indication is cleared and the switch is switched to the plus position. Click the “Run†button in the test window to enter the test state.
(7) Until the specimen breaks, save the test data;
(8) Remove the sample, and then switch the switch to a quick-reverse gear to return the piston to the bottom;
(9) If necessary, a printed test report can be output;