China-Hopper-Loader-Plastic-Machinery-PC-Dehumidifying-ABS-Dehumidifier

<

STANDARD CONFIGRAUTION
♦ Integration of dehumidification, drying and conveying functions;
♦ Dehumidification, drying and conveying integrated unit are equipped with honeycomb rotor for getting low dew-point dry air with good stability. Cut-off valve in semi-open and fully-enclosed feed system are equipped to assure no remnants materials left in material pipe.;
♦ Equipped with micro computer and photosensor hopper for optical machine for micro powder cleaning, avoiding spot in optical products.;
♦ Stainless steel mirror polishing of all material contact surface and closed loop feeding system to avoid the material get contaminate or damp;
♦ High-performance filter to filter dusts down to 0.3um and the filtration rate can reach 99.995%;
♦ Bottom blowpipe design of material barrel with cyclone exhaust device for thermal drying barrel, to keep temperature and improvedrying efficiency;
♦ Double cooler structure to assure lower return air and dew-point.
 


 
WHAT IS" HONEY-COMB "?

The main body of honeycomb rotor is formed by ceramic honeycomb which is made from ceramic
fiber and organic addictive. Molecular sieve and silicone as basic material are crystallized and sintered
at high temperature for hard surface and tightly attached to the internal wall of honeycomb. Therefore,
it would not generate silt as barrel packaged or turntable molecular sieve to contaminate the plastic.
The honeycomb rotor can be used permanently and can be washed, while the ordinary molecular sieve
must be usually replaced for its easily getting saturate and aging. The water of moisture return air will be
quickly absorbed by molecular sieve when it across innumerable ostioles of the honeycomb rotor,

Therefore ,the air is completely dehumidified and reaches a very low dew-point. Regenerating and
dehumidifying happen simultaneously and follow the similar principle, except that their regeneration
air flows in the opposite direction.

WORKING PRINCIPLE

Dehumidification and drying: The hot and humid air from drying material barrel is blown into honeycomb rotor
after cooling. The water in air is absorbed by rotor and then desorbed by the regeneration heating air. The two
airflows workon the rotor at the same time, and as the rotor rotates, the water in air can be absorbed and desorbed continuously. Thus,a stable low dew-point air is formed and then blown into the drying barrel after heated to the
drying temperature of plastic, forming a closed loop to dry material.

Material suction: material suction is to suck material from material barrel or other material container into drying
material barrel. The motor starts to run when the magnetic reed switch of the vacuum hopper detects no material,
generatingvacuum in vacuum hopper, and then the material in material barrel will be sucked into vacuum hopper
because of the pressure difference of air. The motor stops working after sucking and the material will drop into
drying barrel. At last the dried material will be sucked into SVH hopper or other hopper which is set in plastic
moulding machine.

SPECIFICATION
COMPANY PROFILE
         XINGKE , Officially launched the business cooperation with SHINKOR(Korea)in 2016, It has introduced a technician from Korea and focus on development of technologies to be our engineering director,The objective of XINGKE is to make "Technology as the core,customer as the oriented" becomes to solution provider for automation system. 

TECHNICAL SUPPORT
      XINGKE has two major production in abroad and China, with a lot of agents , representative offices and four branch in over the world ,set up the leading visualize in molding manufacturing processing





WHY US ?
* More than 30 years experience in plastic moulding & extrusion industry;
* CE,ROTH,ISO etc. certification exams passed.
* Professional sales team for overseas markets;
* High efficiency, High communicate

PRODUCTS VIEW
* Raw Materials Processing System
* Centralized Drying Dehumidifying System
* One-Stop Solution
* "Euro" Slow-Speed Granulators
* Gravimetric Blenders
* "Euro" Hopper Dryers
* All In One Dehumidifier Dryers
* Honeycomb Dehumidifiers
* Oil Heaters
* Water Cooled Chillers

FAQ
1) Are you manufacturers or trading company ?
X: Manufacturer.We produce machines in China factory and developing products from South Korea for best technical resourses , It can realize to advanced technology and reasonable cost for clients.
2) Do you have CE,EU,ISO9001 etc. certification ?
X:Yes , All of our products approved with these certifications.
3) Do you have any experience in new IMM fatory planning ?
X:Yes, also we can offer you one - stop solution (liquid water ,eletric,vacuum ) for your IMM or extrusion facory. 
PRODUCTION PROCESS


EXHIBITIONS

Auger Pile Drilling Rig

Crawler type piling rig,Solar piling drill rigs is widely used in photovoltaic, foundation drilling, it is most advanced hydraulic drilling rig for solar drilling application. The rig can be operated in very flexible way.


As per the emission standard which requires a quality and better emission diesel engine in most of European countries and North America,the customized-made PV piling rig will be the unique solution


The feed can be turned left and right in different angle to fit the variable application. The full coverage area for drilling is seriously considered to achieve extremely drilling position. For solar power station, Photovoltaic drilling, pile drilling and highway guardrail drilling as well as construction drilling is most suitable.


Besides piling drilling, it can do blasting hole drilling for mining.

It is fully hydraulic control solar piling machine, it can has highest drilling efficiency for operator, especially for time limited project. And the key components are from top end brand, such as Deutz AG diesel engine,Cummins engine, Yuchai diesel engine,Permco pump,Eton motor, Parker hoses and Rexroth pump. All these key components can make sure solar pile driving Machine has longest lifetime and least break down.

The Photovoltaic rig`s drilling model can be selected from impact hammer to rotary head for different geological structure.

Photovoltaic pile driver is not only for photovoltaic or soloar piling drilling, it also can work for water drilling and foundation drilling etc. multi-functional drilling work.

Solar pile driver has some unique design to has it to operate in every sharp slope area and in order to make operator a very vertical borehole in any position.

Yikyui PV pile driver has rotary boom with rotary platform. With this function, operator can drill in very accurate position with less moving of Pile drilling machine, which can save time and higher quality borehole.

Foundation Engineering,Crawler Type Piling Rig,Crawler Piling Machine,Crawler Piling

Henan YK Prospecting Machinery Co., Ltd , https://www.yydthdrillingrig.com