Galvanized Steel Sheet Corrugated Panel Roll Forming Machine

<

Model NO.: SH-CP
Material Thickness: 0.8-2.0mm
Weight: 8t
Power(W): 7.5kw
Voltage: 380V 50Hz 3phases
Feeding Width: 940mm
Warranty: 1 Year
Controlling System: PLC Control with Touch Screen
Effective Width: 762mm
Rolling Speed: 12-15m/Min(Cutting Time Is Not Include)
Trademark: Suhang
Transport Package: Naked and Fasten in The Container
Specification: 8000*1600*1500mm
Origin: Wuxi, Jiangsu
HS Code: 8455229090
Galvanized Steel Sheet Corrugated Panel Roll Forming Machine

1.Technical Parameter
 
No. main parameter of roll forming machine
1
 		 suitable material Color Steel plate, galvanized sheet
2
 		 Width of the plate 1000mm
  effective surface 928mm
3 Rows of rollers 13 rows
4 Size   5.5*1.3*1.2m
5 Total power 4+3kw
6 Thickness of raw material 0.3-0.8mm
7 Productivity 8-10m/min
8 diameter of shaft 70mm
9
 		 Weight About 4T
10
 		 Voltage 380V 50Hz 3phases

2. Component Specification

a, Auto-Uncoiler:It is used to support the steel coil and uncoil it in a turnable way
The steel coil is uncoiled by hand. Loading capacity:5T,Inner diameter: 500-508mm
b, Feeding Table:Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat
Parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
c, Main Roll Forming Machine:45# steel,roller surfaces polishing, hard plating
The polished surface and the heat treatment towards the molds also can keep the molding
Plate surface smooth and not easy to be marked when it is being stamped
d, Hydraulic System :4kw,Hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted
Computed mode has two modes: automatic and manual one.The system is easy to operate and use
e, Hydraulic cutting:It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment

3. Working Flow of Roll Forming Machine
 
De-coiler-→Level device -→Main roll forming machine-→Hydraulic cutting-→ Run out table

4. Advantage

1. CE and ISO certificate
2. Easy operation
3. Low price and high quality
4. High productivity
5. PLC control system

5. Our service

1. Installation and training of rolling forming machine:
a.If buyers visit our factory and check the machine, we will teach you how to install and use the machine, 
and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and other n
ecessary things.
2. After Service of rolling forming machine
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of  rolling forming machine, we will repair it for free in one year.

6.Company information
   Wuxi Suhang Machinery manufacturing Co., Ltd. is a professional manufacturer and exporter.Which has its own factory with the design, development and production of cold roll forming machines,material of building.
  The main products of factory is Roller shutter door, PU sandwish panel line,Double layer roll forming machine, Racking roll forming machine, the cable tray roll forming machine, Glazed Tile forming machine,etc
  All products comply with international quality standards and are greatlyappreciated in variety of differen tmarkets throughout the world, such as As-ia, Africa, Europe,South America, and Australia and so on.
  Suhang machinery is located in Wuxi city, Jiangsu province which is close to Shanghai,  It's about half an hour's journey. We enojoy the convenient transportation and advantageous location which supply good business opportunities for the buyers home and abroad.

Polyethylene Winding Structural Wall Tube

Polyethylene Winding Structural Wall Tube

The kra pipe can be divided into PR, OP, SQ, and VW series, among which: PR and OP are mainly used as buried drainage pipes. SQ is mainly used to make containers or inspection wells. VW is mainly used for pipe fittings formed by tee, elbow, and secondary processing. PR series is the most widely used in the products, which has a smooth inner surface and abnormal external reinforced structure. The standard length of the pipe is 6 meters. The inner diameter range of the pipe is DN300-DN4000, and the product indicators all meet the requirements of GB/T 19472.2-2017 type B structure wall pipe standard and EN-13476 European standard.

The application of HDPE kra pipe
1. Municipal water supply and drainage: The internal pressure of high-density polyethylene (HDPE) winding reinforced pipe can reach 12kg/cm2, which is the ideal pipe to replace the original drainage cast iron pipe and cement pipe in the city. The pipe can be used for municipal underground drainage, sewage, rainwater collection, water transmission, ventilation, etc to discharge liquid and gaseous substances into rivers or the sea. Thermal structure wall winding pipe has the advantages of lightweight, safe, reliable connection,corrosion resistance, and high ring stiffness, therefore the use of thermal structure winding pipe has great advantages.
2. Large-scale water conservancy projects: long-distance water transmission, farmland irrigation, reservoir drainage, water source pipe, irrigation pipe and hydropower station water transmission, drainage use;
3. Environmental protection engineering: deep sea sewage, sewage treatment, waste
dump sewage, detoxification pipeline. Due to the thermal structure wall winding pipe of various pipe wall structures and pipe, inspection well, pipe fitting, and its reliable connection performance, the pipe can be used for advanced shallow drainage systems.
4. Petroleum industry: oil, gas pipeline.
5. Coal industry: coal transport, ventilation systems.
6. Chemical engineering: chemical containers, especially corrosive fluid delivery
pipelines.
7. Electric power engineering: circulating water pipeline.
8. Road engineering: crossing roads and railways have a large traffic load of water
culverts and crosswalks; Used as railway and highway road seepage, drainage pipe; The method of "liner in pipe" is becoming more and more important for repairing damaged pipes.
9. The laying of pipes in a corrosive environment.
10. Agricultural engineering: farmland, orchard, tea garden and forest belt irrigation, and so on;
11. Large airport port, wharf engineering: large airport port, wharf engineering drainage, sewage pipe, etc.
12. Construction engineering: building stormwater pipes, underground drainage pipes, sewage pipes, ventilation pipes, etc.
Communication tube: railway, highway communications, communication cables, optical cable protection pipe.
14. Water storage system: used to intercept the slow water storage system.
15. Special application: thermal winding wall winding pipe can also be used for special
purposes such as ventilation, passage, desert, swamp, lake area with fluid transport, etc.

Polyethylene Winding Structural Wall Tube,Double Corrugated Krah Pipe,Double Wall Corrugated Krah Pipe,Corrugated Drain Carat Pipe

Hebei Taiwo Plastic Pipe Co.,Ltd , https://www.taiwocarattube.com