Wheel Loader brake clamp are divided into XCMG type, XGMA type, Liugong type, CHENGGONG type, Loader brake pads are also different. The Loader brake clamp are mounted on the Loader Drive Axle Assembly

Liugong 835 Loader brake clamp disassembly and maintenance method; Clamp down the need to prepare before a clamp kits, disassemble the shaft head, the whole tear open come down to the tyre, clamp tubing and fixed bolt will be removed, take down, the clamp whole out of brake pads, remove the dust cover, piston push the piston can, if the piston is acerbity or jammed, can be appropriately hitting piston is desirable. After removing the piston, clean the dirt and check whether the piston is damaged or rusted. If so, replace the piston with a new one. After cleaning, in accordance with the reverse order of disassembly can be installed back, the piston process, should pay attention to the piston and sealing ring with clearance, can not be forced into, need to smear lubricating oil on the surface of the piston, after the piston is installed, back and forth activities, check whether the piston is smooth. In the installation process, the dust cover should be installed well. Because of the large dust in the working environment of the loader, if the dust cover is not installed or improperly installed, the piston is easy to jam or leak oil. After installing all the dust cover, add the edge oil of the wheel.

Brake Clamp,Liugong Loader Brake Clamp,Xcmg Loader Brake Clamp,Sdlg Loader Brake Clamp,Xgma Loader Brake Clamp

Henan Hanfeng Construction Machinery Co., LTD , https://www.hf-loaderparts.com