Original Enerpac Rsm, Rcs-Series, Low Height Hydraulic Cylinders

<

  • Model NO.: RSM-1000, RSM-300, RSM-50, RCS-1002, RCS-302
  • Usage: Automation and Control
  • Power: Hydraulic
  • Pressure Direction: Single-acting Cylinder
  • Trademark: ENERPAC
  • Origin: USA, China
  • Material: Stainless Steel
  • Structure: General Cylinder
  • Standard: Standard
  • Double-Acting Cylinder Type: Common Cylinder
  • Specification: steel
  • HS Code: 8412210000

RSM, RCS-Series, Low Height Hydraulic Cylinders

 

RSM-Series, Flat-Jac® Cylinders

  • Compact hydraulic cylinder wtih a flat design for use where most other cylinders will not fit
  • Single-acting, spring return
  • RSM-750, 1000 and 1500 cylinders have handles for easy carrying
  • Mounting holes permit easy fixturing
  • Baked enamel finish for increased corrosion resistance
  • CR-400 coupler and dust cap included on all models1)
  • Hard chrome plated high quality steel plungers
  • Grooved plunger ends require no saddle.

RCS-Series, Low Height Cylinders

  • Lightweight, low profile cylinder design for use in confined spaces
  • Single-acting, spring return
  • Baked enamel finish for increased corrosion resistance
  • Plunger wiper reduces contamination, extending cylinder life
  • CR-400 coupler and dust cap included on all models
  • Grooved plunger end with threaded holes for mounting tilt saddles
  • Integral handle on RCS-1002 for easy carrying
  • Plated steel plungers.
 
Cylinder
Capacity		 Stroke Model
Number		 Cylinder
Effective Area		 Oil
Capacity		 Collapsed
Height		 Extended
Height		 Outside
Diameter		 Weight
ton (kN) mm cm2 cm3 mm mm mm kg
5 (45) 6 RSM-501) 6,5 4 32 38 58 x 41 1
10 (101) 12 RSM-100 14,5 18 43 54 82 x 55 1,4
20 (201) 11 RSM-200 28,7 32 51 62 101 x 76 3,1
30 (295) 13 RSM-300 42,1 55 58 71 117 x 95 4,5
45 (435) 16 RSM-500 62,1 99 66 82 140 x 114 6,8
75 (718) 16 RSM-750 102,6 164 79 95 165 x 139 11,3
90 (887) 16 RSM-1000 126,7 203 85 101 178 x 153 14,5
150 (1368) 16 RSM-1500 198,1 317 100 116 215 x 190 26,3
10 (101) 38 RCS-101* 14,5 55 88 126 69 2,7
20 (201) 45 RCS-201* 28,7 129 98 143 92 5,0
30 (295) 62 RCS-302* 42,1 261 117 179 101 6,8
45 (435) 60 RCS-502* 62,1 373 122 182 124 10,0
90 (887) 57 RCS-1002* 126,7 722 141 198 165 20,7

Original Enerpac Rsm, Rcs-Series, Low Height Hydraulic CylindersOriginal Enerpac Rsm, Rcs-Series, Low Height Hydraulic Cylinders

Catalyst

Hardeners, also called hardeners, are substances or mixtures that enhance or control curing reactions. Curing agent is an essential additive. Whether used as adhesive, coating or castable, curing agent should be added, otherwise Epoxy Resin can not be cured. Resin curing is a process of irreversible change of thermosetting resin through condensation, closed-loop, addition or catalysis and other chemical reactions. Curing is accomplished by adding curing (crosslinking) agent. The kinds of curing agent have great influence on the mechanical properties, heat resistance, water resistance, corrosion resistance and so on.

Curing Agent,Epoxy Curing Agent,Amine Curing Agent,Sodium Silicate Curing Agent

Jiangyin Thousands Chemicals Co. , https://www.jywqhxcomposite.com