Adhesive tape detector operation method Dongguan City Tesite Detection Instrument Co., Ltd. specializing in the production and sale of adhesive tape detector , please call 0769-89293129 consulting adhesive tape detector price , provide adhesive tape tester regulations , Adhesive tape detector repair. Test steps: (1) Wipe the test plate and loading plate with the cleaning material and wipe with a cleaning agent, then wipe it dry with a clean gauze, and then repeatedly clean it more than three times until the work surface of the plate is visually inspected and cleaned. After cleaning, do not touch the working surface of the plate with your hands or other objects. (2) At a temperature of 23 °C ±2 °C and a relative humidity of 65 % ±5 %, affix the specimen parallel to the longitudinal direction of the plate to the center of the test plate and the loading plate immediately following the dimensions specified in Figure 2 . . A roller was used to roll on the sample at a speed of about 300 mm/min . Note that when rolling, only the force generated by the pressure roller can be applied to the sample. The number of rolling can be specified according to the specific product conditions. If not specified, rolling is performed three times. (3) After the sample is affixed on the board, it should be placed under the condition of 23 °C ± 2 °C and relative humidity of 65 % ± 5% for 20 min . Then, the test board is vertically fixed on the test stand, and the pin and the weight are gently connected with the test board. The entire test rack is placed in a test box that has been adjusted to the required test environment. Record the test start time. (4) After reaching the prescribed time, remove heavy objects. Using a graduated magnifying glass to measure the sample's downward displacement, accurate to 0 . 1mm ; or record the time the sample was removed from the test plate. If the time is greater than or equal to 1h , the unit is min , and if it is less than 1h , the unit is s . The adhesive tape tester adhered the tape to the test board and suspended the standard load at the lower end . After a period of time , the tape was measured for the slide distance or the tape sticking time to evaluate the durability of the adhesive tape. Adhesive tape detector technical parameters: temperature    Degree : room temperature Test fixture : 5 groups ç    Code : 1KG (or specified) Timer : 5 groups , 99999.9 hours Dimensions : (L × W × H) 530 × 250 × 650 mm Machine weight : 32kg Test plate : 5 pieces Loading steel plate : 5 pieces Design Standards: CNS-11887 , 11888 , PSTC-7 , GB/T 4851
High-end refrigeration instrument testing equipment, source factory,High-end refrigeration instrument testing equipment, source factory, stock inventory, can accept customization and OEM service
Our company has always had strict quality control standards in the market of refrigeration and heat exchange equipment, focusing on providing customised services to our customers. Not only do we have high requirements for the selection of raw materials, but we also keep up to date with the latest production processes and have high testing standards.
Our company mainly produces products for:Fin Evaporator.Fin Type Condenser.Capillary Tube. Coolant Reservoir.Plate Reinforcement Parts.Stamped Parts. Aluminum Tube .Instrument Testing Equipment.
Instrument Testing Equipment,Precision Salt Mist Tester,Salt Spray Tester Tester,Adjustable Electric Heating Plate Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.yukunevaporator.com
If you have any interest, please feel free to contact us. We can provide customized service according to your drawings or samples.